MINUT E1

Building-wide intelligence. Zero maintenance.

Noise, smoking and indoor climate monitoring for the buildings you look after, with nothing to maintain. No batteries, no dead zones, no walls in the way.

Book a demo

Hardwired power

Zero maintenance

Sub-GHz mesh networking

No cameras or audio

Meet the E1

Minut E1 sensor from the back with its cable connected

Zero maintenance, zero downtime

E1 is hardwired - USB-C, PoE, or AC mains. No batteries to replace. No charging schedules. No offline sensors creating compliance gaps across your portfolio. Ceiling-mounted and tamperproof, E1 installs once and runs continuously so your team can get on with everything else.

Advanced smoking detection

E1’s triple particle sensors give you advanced smoking detection, with a timestamped record of every incident.

Doesn't rely on WiFi

Coverage in every unit, regardless of your building’s network setup. E1’s built-in mesh connects sensors to each other through concrete walls and across floors, with fewer gateways and no reliance on WiFi. It keeps working in the buildings where WiFi doesn’t.

One sensor covers everything

Noise, smoking, occupancy, motion, and climate - monitored continuously from a single device per room. Fewer devices to manage, fewer vendors to coordinate, one platform for your entire portfolio.

Privacy-first, always

No cameras. No audio recording. No surveillance. E1 monitors environmental conditions only, fully compliant with GDPR and SOC 2. Built for the places people call home.

Connects to the platforms you already use

E1 supports automated alerting, incident documentation, and API-driven workflows. Your team keeps working the way it already does, with better information and proof behind every decision.

One device, building-wide intelligence

E1 flags issues in every unit before they become complaints, so your team can spot them early, uphold your policies fairly and look after residents, without adding to anyone’s workload.

Advanced smoking detection

Indoor noise monitoring with configurable thresholds

Temperature and humidity monitoring

Sub-GHz mesh networking across floors and buildings

What type of building do you manage?

Keep your smoke-free promise, with a record to back it up.

Uphold lease policies with a timestamped record of every smoking incident

Close the gaps left by offline or battery-powered sensors

Monitor buildings and areas where wireless network doesn’t reach

Smoking detection

Noise monitoring

Motion detection

Temperature & humidity

Sub-GHz mesh networking

Reports & documentation

Book a demo

“Minut has been instrumental in quickly identifying smoking incidents, allowing us to take immediate action and helping us reduce the associated costs.”

6PM Hospitality Partners

Fewer complaints. Better NPS. Happier students.

Resolve noise issues before they become negative reviews

Keep rooms smoke-free without relying on RA patrols

Deploy across campus - coverage in every unit, regardless of your building’s network setup

Noise monitoring

Smoking detection

Occupancy monitoring

Temperature & humidity

Sub-GHz mesh networking

Real-time alerts

Book a demo

“With Minut, we can act as soon as noise is detected rather than one or two days after, when a complaint comes in.”

Domingo Delgado, Regional Operations Manager, Livensa Living

Continuous protection for the residents in your care.

Monitor temperature, humidity, and motion (optional) across every unit

Keep smoke-free policies fair, with facts instead of confrontation

Zero maintenance - free your staff for resident care

Temperature & humidity

Motion detection (optional)

Smoking detection

Noise monitoring

Sub-GHz mesh networking

Real-time alerts

Book a demo

Privacy is the product, not a setting

No cameras or recordings

Minut Living never captures images or records audio. In student housing, sustained noise in shared spaces is measured as sound levels only, so Minut can let you know a corridor is loud without hearing a single word.

Raw data stays on the sensor

Minut splits processing between the sensor and the cloud, so raw sensor data never leaves the device. Only smoke events and climate readings reach your team, so they can act when necessary.

Purpose-built for rental buildings

Consumer smart-home hardware streams raw data to the cloud, relies on apps and accounts that residents control, and collects too much to make a privacy promise. Minut Living runs on its own network, works without resident WiFi, and is designed to collect only what you need.

Privacy settings are locked

Privacy protections are fixed at the platform level, so no operator can switch them off or loosen them. Residents get the same protections in every building, whoever manages it.

Coming soon: A resident portal

Residents will be able to see data from their own home, so they know exactly what’s being measured.

Engineered for permanent deployment

E1 is designed for buildings where maintenance access is limited, connectivity is unreliable, and sensors need to run for years without attention.

Hardwired power, zero downtime

Connect via USB-C, Power over Ethernet (PoE), or AC mains. No battery changes. No charging rotations. No offline units creating gaps in your monitoring coverage.

Mesh networking that works through walls

Advanced smoking detection

View product specifications

SMOKE ID

87% of smoking events detected, more than twice the closest competitor

SmokeID gives your team alerts they can trust. It recognizes cigarette and cannabis smoke and ignores common false triggers like cooking, candles, and hairdryers, so staff respond to genuine incidents.

In the lab

Setting the benchmark for smoking detection

We tested SmokeID side by side with competitor smoking detectors under identical lab conditions, and every result below is published with its test conditions.

Real cigarette smoke events caught

Higher is better

Minut E1 (with SmokeID)84%

Alertify31%

Wynd Sentry0%

False alarms from cooking

Lower is better

Minut E1 (with SmokeID)12%

Alertify79%

Wynd Sentry10%

Minut smoke lab, March to July 2026. 25m² room, standard ventilation (20% plus fan variations tested), single-cigarette test protocol. E1: normal mode, ceiling-mounted, n=264; Alertify n=132; Wynd Sentry n=66. Cooking comparison uses cooking-only scenarios.

Trusted by building operators

See how property teams use Minut to run safer, more efficient buildings.

See our success stories

«Minut è stato determinante nell'identificare rapidamente i casi di fumo, consentendoci di agire immediatamente e aiutandoci a ridurre i costi associati. Come marchio, vogliamo che i nostri hotel partner offrano un'esperienza a 5 stelle e Minut ci aiuta a garantirlo».

6PM Hospitality Partners

«Con Minut, possiamo agire non appena viene rilevato un rumore anziché uno o due giorni dopo, quando arriva un reclamo. Ci ha aiutato a dimostrare ai residenti che prendiamo sul serio il loro feedback e diamo priorità al loro benessere».

Domingo Delgado

Livensa Living

Privacy is built in, not bolted on

E1 monitors environmental conditions - sound levels, air particles, temperature, humidity - never conversations, images, or identities. Made for the places people live, not just visit.

GDPR compliant

SOC 2-level data protection

No excessive data retention

No audio recording

No cameras or video

No surveillance of any kind

Over 50,000 property managers use Minut to protect their buildings

$28M+

of property damage prevented every year

94%

of issues are resolved within 15 minutes

4.9 / 5

average rating on reviews.io

100+

countries where Minut is used

Swedish-engineered. Globally trusted.

E1 is designed, manufactured, and tested in-house at Minut’s Swedish headquarters. By owning the entire process — hardware, software, and AI — we ensure the precision, privacy, and long-term reliability that building operators depend on.

Look after every unit, without being in every unit

See how E1 fits your portfolio. Our team will walk you through deployment options, connectivity architecture, and pricing.

Book a demo

Frequently asked questions

What’s the difference between E1 and M3?

The right choice comes down to your deployment model. M3 is battery-powered and WiFi-connected - built for flexibility. It installs in minutes without any infrastructure work, moves easily between properties, and works wherever there’s WiFi. If you manage distributed properties and need to deploy or redeploy quickly, M3 is the right fit.

E1 is hardwired and built for permanence. Mount it, plug it in, and it runs continuously without maintenance, battery upkeep, or charging cycles. If you manage a whole building with long-term residents and need sensors that never go offline, never need servicing, and work through concrete walls, E1 is the right fit.

The tradeoff is simple: M3 gives you flexibility. E1 gives you permanence. They serve different operators - E1 is not an upgrade from M3, and M3 is not a stepping stone to E1.

How does E1 connect if there’s no WiFi in units?

E1 sensors connect to each other over their own sub-GHz mesh, through concrete walls and across floors. A G1 gateway then connects the building over its own cellular connection, so nothing depends on the building’s WiFi.

What power options does E1 support?

E1 is hardwired. Connect it via USB-C, Power over Ethernet (PoE), or AC mains, so each building can use what suits it. There are no batteries to replace.

How many E1 sensors do I need per building?

One E1 per room or unit you want to monitor. A single device covers noise, smoking, occupancy, motion and climate. Our team will help you plan coverage and gateways for your building.

Does E1 integrate with my property management system?

Yes. Minut has a strong ecosystem of integrations, and E1 supports automated alerting, incident documentation, and API-driven workflows.

Building-wide intelligence. Zero maintenance.

Meet the E1

Zero maintenance, zero downtime

Advanced smoking detection

Doesn't rely on WiFi

One sensor covers everything

Privacy-first, always

Connects to the platforms you already use

One device, building-wide intelligence

Always on. No maintenance. Built for buildings that never stop.

What type of building do you manage?

Keep your smoke-free promise, with a record to back it up.

Fewer complaints. Better NPS. Happier students.

Continuous protection for the residents in your care.

Privacy is the product, not a setting

Engineered for permanent deployment

Hardwired power, zero downtime

87% of smoking events detected, more than twice the closest competitor

Setting the benchmark for smoking detection

Trusted by building operators

Privacy is built in, not bolted on

Over 50,000 property managers use Minut to protect their buildings

Swedish-engineered. Globally trusted.

Look after every unit, without being in every unit

Frequently asked questions

Iscriviti alla nostra newsletter mensile