Technical Specifications


One Minut Home Sensor covers approximately 70 m² (753 ft²), equivalent to a large room or outdoor area. Most of our customers put their device in the area where people are likely to gather, like the living room or patio.

The motion detection range alone is approximately 25 m² (269 ft²) in a circle around the unit when mounted at a standard ceiling height of 2.4 meters (7.9 ft). Minut battery lasts up to one year, so it will have to be removed periodically for charging.

If you’re using Minut indoors, you can also install the sensor on the wall, permanently plugged into a power outlet to eliminate the need for charging. You should not leave Minut plugged in outdoors.

Technical Specifications

Dimension & weight

Diameter: 115 mm
Height: 28mm
Power cable: 20 cm
Weight: 250 gram

Battery & power

Battery life ~12 months
Charging via USB-C


Wifi 802.11 b/g/n (2.4GHz)


Tamper Detection

System requirements

iOS 15 or higher
Android 5.1 and higher

Operating Conditions

Operating temperature range: -10 to 50ºC / 14ºF to 122ºF

Integrates with

Airbnb, 20+ property mangement systems, smart locks, Zapier and more

Inside the box

Charging cable
mounting plate

Power and charging

a. Charge indicators
White solid: Fully charged
White blink: Charging
Red blink: Low battery

b. Button
On/Off: 2 seconds
Setup mode: 7 seconds
Exit setup mode: 5 seconds
Reset: 10 seconds
Factory reset: 13 seconds
c. Charge port